Double Decker Chocolate Peanut Butter Fudge Recipe (2024)

FAQs

Why did my peanut butter fudge not get hard? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

​Harden the fudge:​ Place your container or tins in the fridge for 2 hours, which is the time it takes for the fudge to set. Once it's hardened, cut the fudge into 12 pieces or remove it from the muffin tins. Store in the fridge or the freezer (if you don't devour it right away).

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

Brush the sides of the pan with a wet brush at the beginning of cooking to dissolve sugar crystals stuck to the sides. Never stir the mixture during cooking or sugar could crystallize again. The mixture may seize and become grainy. Use a candy thermometer or conduct a cold water test to check if the fudge is done.

How to Fix Grainy Fudge. If, despite your best efforts, your fudge is grainy when you go to transfer it to your pan, never fear! You can fix it. Just place the fudge mixture back in a saucepan on the stovetop with about 1½ cups of water and slowly melt the fudge to a smooth liquid.

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

How do you fix crumbly peanut butter fudge? ›

You could also gently heat the fudge with some moisture. This could be done: In the microwave - microwave in short increments with a glass of (warm) water, which creates steam for the fudge to absorb, until the fudge no longer feels/looks dried out.

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature. Don't throw out the whole pan, because you may be able to melt the fudge down and try again.

However, if you don't beat it at all, the crystals won't form properly, so your fudge won't set. If you forget to beat the fudge, try heating it back up over low heat, then beat it once it's slightly softened. If you beat the fudge too soon, the crystals will be too large, and the fudge will be grainy.

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

You could also gently heat the fudge with some moisture. This could be done: In the microwave - microwave in short increments with a glass of (warm) water, which creates steam for the fudge to absorb, until the fudge no longer feels/looks dried out.

If there is too much evaporation, when the cooking time is too long, there will not be enough water left in the fudge and it will be too hard. Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft.

You have one option to make it soft, which is you have to put the fudge pieces in a plastic bag along with the paper towel or a bread slice. Secure the bag and leave it overnight, next day you will get a softened fudge.