QUICK START GUIDE · 2019-01-23 · ac Side Angle Standard Optical RCA RCA To 3 5mm Satellite HDMI Cable Standard Optical RCA RCA To 3 5mm Satellite HDMI Cable Installation uide odels

QUICK START GUIDEModel: SB3651-F6

VIZIO Home Theater Sound System

Please read this guide before using the product.

English - ii

Your Unit is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent your Unit from being damaged, the following rules should be observed for its installation, use, and maintenance. Please read the following safety instructions before operating your Unit. Keep these instructions in a safe place for future reference.• Read these instructions.• Keep these instructions.• Heed all warnings.• Follow all instructions.• Do not use this apparatus near water.• Clean only with a dry cloth.• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid injury from tip-over.• Unplug this apparatus during lightning storms or when unused for long periods of time.• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your Unit.• Unplug the power cord before cleaning your Unit. A damp cloth is sufficient for cleaning. Do not use a liquid or a spray cleaner on your Unit. Do not

use abrasive cleaners.• Always use the accessories recommended by the manufacturer to insure compatibility.• When moving your Unit from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before

turning on your Unit to avoid causing fire, electric shock, or component damage.• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your Unit and to protect it

from overheating, be sure these openings are not blocked or covered. Do not place your Unit in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slots and openings on your Unit enclosure. Do not place any objects on the top of your Unit. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your Unit.

• Never use the subwoofer in the upright, vertical position without installing the legs• Do not block the subwoofer ports. Allow for 1-2 inches of space around all sides for ventilation.• WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued

IMPORTANT SAFETY INSTRUCTIONS

English - iii

exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort.

• When connected to a power outlet, power is always flowing into your Unit. To totally disconnect power, unplug the power cord.• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.• The wall socket should be located near your Unit and be easily accessible• Keep your Unit away from moisture. Do not expose your Unit to rain or moisture. If water penetrates into your Unit, unplug the power cord and

contact your dealer. Continuous use in this case may result in fire or electric shock.• Do not use your Unit if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer

immediately. Do not try to repair your unit yourself.• Avoid using dropped or damaged appliances. If your Unit is dropped and the housing is damaged, the internal components may function abnormally.

Unplug the power cord immediately and contact your dealer for repair. Continued use of your Unit may cause fire or electric shock.• Do not install your Unit in an area with heavy dust or high humidity. Operating your Unit in environments with heavy dust or high humidity may

cause fire or electric shock.• Ensure that the power cord and any other cables are unplugged before moving your Unit.• When unplugging your Unit, hold the power plug, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or

electric shock. When your Unit will not be used for an extended period of time, unplug the power cord.• To reduce risk of electric shock, do not touch the connector with wet hands.• Insert the remote control batteries in accordance with instructions. Incorrect polarity may cause the battery to leak which can damage the remote

control or injure the operator.• See the important note and rating located on the back of the unit.• WARNING - This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near the equipment

(such as a vase or flower pot) or expose it to dripping, splashing, rain, or moisture.• CAUTION - Danger of explosion or fire if batteries are mistreated. Replace only with the same or specified type.• Do not leave the batteries exposed to direct sunlight for a long period of time with doors and windows closed. Do not disassemble the batteries or

dispose of it in fire.• Where the MAINS plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.• No naked flame sources,such as lighted candles,should be placed on the apparatus.• The ventilation should not be impeded by covering the ventilation openings with items,such as newspapers, table-cloths, curtains, etc.• The equipment shall be used at maximum 35 degree C ambient temperature.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage within the product that may be sufficient magnitude to constitute a risk of shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

Warning: This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

English - iv

TABLE OF CONTENTSPackage contents ............................................................................................................................................5Controls & Connections ..................................................................................................................................6First-Time Setup...............................................................................................................................................10Using the Remote ............................................................................................................................................16LED Indicators ..................................................................................................................................................18Using Button Combinations ...........................................................................................................................22Programming the Sound Bar .........................................................................................................................23Bluetooth Audio Pairing ..................................................................................................................................24Using Bluetooth mode ....................................................................................................................................25Advanced Setup ...............................................................................................................................................26Advanced Setup - HDMI ..................................................................................................................................27Connecting with HDMI ARC ............................................................................................................................28Connecting a Subwoofer ...............................................................................................................................30Wall-Mounting the Sound Bar ........................................................................................................................31Wall-Mounting the Satellite Speakers ...........................................................................................................33Help & Troubleshooting ..................................................................................................................................36Limited Warranty .............................................................................................................................................37Legal & Compliance .........................................................................................................................................40

English - 5

PACKAGE CONTENTS

4 x Wall Mount Screws

Digital Optical Cable

2 x Power Cables

Coaxial Audio Cable

Quick Start Guide

VIZIO SmartCast™ Sound Bar

Remote Control with 2x AAA Batteries

Wireless Subwoofer 2 x Satellite Speakers

Stereo RCA to 3.5mm Audio Cable

3.5mm to 3.5mm Audio Cable

2 x Satellite Speaker Audio Cables

2 x Wall Mount Brackets

(Sound Bar)

2 x Wall Mount Brackets

(Satellite Speakers)

HDMI Cable

4 x Cable TiesWall Mount Template

Front

Top

Back

Side

Angle

OpticalStandardRCA

RCA To 35mm

HDMISatelliteCable

OpticalStandardRCA

RCA To 35mm

HDMISatelliteCable

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

English - 6

CONTROLS & CONNECTIONS

Power Port OPTICALDigital Optical Audio In

DigitalCoaxial In

3.5mm INAnalog Audio In(Stereo 3.5mm)

Front

Top

Back

Side

Angle

Back of Sound Bar

English - 7

USB* USB In

* Supports .WAV and .MP3 file format playback only.

HDMI INHDMI In

HDMI OUTHDMI Out (ARC) Ethernet

Ethernet In

Front

Top

Back

Side

Angle

English - 8

Top of Sound Bar

Input Press to change the audio source.

Volume Increase or decrease the loudness of the audio.

Power Press to turn soundbar on or off.

Bluetooth Input Hold to pair.(See ‘Bluetooth Audio Pairing’ for more information.)

Front

Top

Back

Side

Angle

Front

Top

Back

Side

Angle

English - 9

Back of Subwoofer Back of Satellite Speaker

Satellite Speaker PortsConnects to Left(blue cable)/Right (gray cable) Satellite Speakers

Satellite Speaker Port(Connects to subwoofer)

Power ButtonPower Port LED Indicator

Pairing Button

English - 10

Front

Top

Back

Side

Angle

Back of Sound Bar

FIRST-TIME SETUP

* Not all TVs/Displays have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-Ray player, game system, etc.) see your device’s user manual.

and connect it to your tv

1CHOOSE ONE CABLE*

3.5MM TO RCA CABLE

GOOD

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

OR OR

BETTER

DIGITAL OPTICAL CABLE†

DIGITAL COAXIAL CABLE†

BETTER

† When using either of the Digital Inputs, if there is no audio: (A) try setting the TV/Display output to PCM or (B) Connect directly to your Blu-ray/other source, some TV/Display do not pass through digital audio.

English - 11

Front

Top

Back

Side

Angle

HDMI cables send Video (Out) and receive Audio from the TV/Display. See the Connecting with HDMI section for more

information.

Do not use HDMI IN for First-Time Setup. See Advanced Setup if you would like to connect

HDMI devices (such as Blu-ray™ players, cable boxes, and game consoles) to your Sound Bar.

Connect the Sound Bar to your TV/Display* using one of the connection types to the left. Choose the best possible connection type. Be sure the TV/Display port is an audio output, not an audio input.

* Not all TVs/Displays have the audio outputs shown above. To connect the Sound Bar directly to your other devices (Blu-ray player, game system, etc) see your device’s user manual.

BEST

HDMI ARC CABLE

English - 12

2 Connect the power cable to the sound bar AC IN as shown. Plug the power cable into an electrical outlet.

Front

Top

Back

Side

Angle

Back of Sound Bar

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

English - 13

Connect the satellite speakers to the subwoofer using the included satellite speaker audio cables.3

Match the color coded speaker cable to the matching speaker port color. Blue for left surround and gray is for right surround.

English - 14

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Connect a power cable to the subwoofer.

Plug the power cable into a power outlet.

Press the power button to turn on the subwsoofer. The LED indicator will illuminate. The subwoofer should automatically power on when plugged in.

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

English - 15

8Remove the battery cover by gently

sliding it away from the remote.

9Insert the included batteries and gently slide the battery cover back into place.

10 Turn on your TV and sound bar. The sound bar will automatically begin searching for an active input.*

The LED indicators on the front of the sound bar will begin cycling in pairs through inputs until an audio source is detected.**

You can press the INPUT button to switch between audio sources. For example, if you connected your TV to AUX, set the sound bar to AUX.

InputPower

Top Top

Tip: Pressing the INPUT button will stop the auto detect function.

*Occurs only during first-time set up.**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT button for 3 seconds.

When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell ‘AAA’ alkaline batteries.

English - 16

USING THE REMOTE

Volume +/- Press to increase and decrease volume.

Previous Press to return to previous track.(Changes audio settings in Menu)

MenuPress to access the menu settings.

Mute Press to mute/unmute.

PowerPress to turn on or off.

Enter/Play/Pause Press to select an option.Press to play or pause.

Next Press to skip to the next track.(Changes audio settings in Menu)

DisplayDisplays Sound Bar Settings

Input*Press to change the input

source

Up/Down Press to cycle through settings

and options

*Press INPUT then Previous to select previous input. Press INPUT then Next to select Bluetooth input.

English - 17

*Press INPUT then Previous to select previous input. Press INPUT then Next to select Bluetooth input.

For the best surround sound experience, position the sound bar, subwoofer, and satellite speakers as shown. The sound bar should be close to ear level.

Note: Speaker stands not included. Do not block the subwoofer ports.

Sound bar is centered

below the TV.

Subwoofer

Left surround speaker

Right surround speaker

English - 18

Function LED Behavior Description

Bluetooth Pairing BT Pair

(When searching for device) Flash from Bottom to Top and back continuously.

Press the Enter button on the remote. The sound bar will be discoverable for 15 minutes. You can now search for the sound bar (VIZIO SB3651*) using your Bluetooth Device. The sound bar will power down if no device is found. Note: Set your Bluetooth device into pairing mode prior to the sound bar.

Bass Levels Bass

Two center LEDs indicate Bass level 0.

Press the Next/Previous button to increase/decrease the bass level. The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels. Note: Decreasing the level to the minimum mutes the subwoofer.

Treble Levels Treble

Two center LEDs indicate Treble level 0.

Press the Next/Previous button to increase/decrease the treble level. The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels.

Center LevelsCenter

Two center LEDs indicate Dialogue is centered.

Press the Next/Previous button to increase/decrease the presence of dialog in the center channel. The LED indicators will move to the top when the dialog presence is increased and to the bottom when the dialog presence is decreased.

Surround Levels Surround

Two center LEDs indicate Surround is centered.

Press the Next/Previous button to increase/decrease the surround sound level. The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels.Note: Surround must be On to adjust the surround level.

Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings of the sound bar. Each function and setting will be displayed on the remote control’s LCD display. The LED Indicators will behave differently with each function.

LED INDICATORS

LED Indicators are located here.

*Sound bar name may be different if the sound bar was previously setup using the SmartCast App.

Front

Top

Back

Side

Angle

English - 19

Function LED Behavior Description

Surround Balance

Surr Bal

Two center LEDs indicate Surround Balance is centered.

Press the Next/Previous button to increase/decrease the surround balance level on each side. The LED indicators will move to the top with balance levels to the right and down with balance levels to the left.

Subwoofer Levels

Subwoofer

Two center LEDs indicate subwoofer level 0.

Press the Next/Previous button to increase/decrease the level of the subwoofer. The LED indicators will move to the top with increasing levels and to the bottom with decreasing levels. Note: Decreasing the level to the minimum turns off the subwoofer.

Equalizer Mode

EQPress the Next/Previous button to toggle between 3 preset equalizer settings, Music, Direct and Movie.Note: Movie mode is on by default.

Surround On/Off

Surnd

Press the Next/Previous button to enable/disable surround sound. When enabled (On), Direct and Movie mode will produce 5.1 surround sound. Music will produce 3.1 surround sound. When disabled (Off), the satellite speakers will be disabled. Note: If EQ mode is set to Direct and Surround is set to Off, the sound bar will output 2.1 audio without center or satellites.

DTS TruVolume On/Off

TruVol

Press the Next/Previous button to enable/disable TruVolume. When enabled (On), TruVolume provides a consistent and comfortable volume level for a more enjoyable listening experience. Note: Default is setting is Off

Night Mode On/Off

Night

Press the Next/Previous button to enable/disable Night Mode. When enabled (On), the sound bar will lower bass frequency levels to provide a more quiet environment (ideal for apartment living and homes with sleeping children).

Surround On

Surround Off

TruVolume On

TruVolume Off

Night Mode On

Night Mode Off

Mov

Mus

Dir

ect

English - 20

Function LED Behavior Description

Virtual:X VRT:X

Press the Next/Previous button to enable/disable Virtual:X. When enabled (On), all inputs will produce a virtual sound technology that simulates the effect of having overhead sound. When disabled (Off), all sources will playback in stereo.

TV Remote VZtv Rmt On

Press the Next/Previous button to enable/disable VIZIO TV Remotes. When enabled (On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV Volume Up button) and control volume.

Program RemotePrg Remote −−

Press the Next/Previous and Play buttons to toggle and select and program your TV remote to control the Volume Down, Volume Up, and Mute functions on your sound bar. See the Program Remote section for more information.

Eco Power On/OffEco Pwr

Press the Next/Previous button to enable/disable Eco Power Mode. When enabled (On), the sound bar will go into standby after a period of inactivity. The sound bar will automatically turn off when no audio signal is detected. Off disables this feature.Note: If you would like to cast content without the need to manually turn on the sound bar, set this function to OFF.

Speaker TestSpkr Test —

Press the Play/Pause button to activate the speaker test function. A voice will begin call-ing out each speaker beginning with left front. (Left Front, Center, Right Front, Right Rear, Left Rear, and subwoofer-white noise) If any of these are missing, check the connection and run the speaker test function again.

LinkLink Yes

Press the Next/Previous and Play buttons to select and confirm enabling or disabling Link Mode on your sound bar. Link Mode allows the VIZIO SmartCast App to reconnect the sound bar to Wi-Fi or paired bluetooth devices in the event of a lost connection or if a new device is being paired.

TV Remote On

TV Remote Off

Eco Power On

Eco Power Off

Single light with sound upon confirmation

Virtual:X On

Virtual:X Off

English - 21

Function LED Behavior Description

Reset −−

Press the Next/Previous and Play buttons to select and reset your remote and sound bar to the factory default settings. All paired Bluetooth devices will be unpaired. All programmed IR remotes will also be removed. See the Reset to Factory Default Settings section for more information.

When a Dolby Digital Plus or DTS signal is detected.

Dolby Digital and DTS are available on the Coaxial In, HDMI ARC, HDMI In, and Digital Optical Audio In inputs. Dolby Digital Plus is only available on HDMI In input. When a Dolby Digital or DTS signal is detected, the Dolby Digital Plus (White) / DTS (Amber) indicator LED will light up for 5 seconds before fading away.

When the soundbar

successfully connects to Wi-Fi.

When Wi-Fi is succesfully set up via the VIZIO SmartCast app or through an ethernet connection, the blue indicator LED will light up to confirm a successful connection.

Dolby Digital Plus and DTS Indicator LED

Wi-Fi Indicator LED

English - 22

Front

Top

Back

Side

Angle

There are 3 functions that are triggered by 3 different button combinations on the sound bar.

Function LED Behavior Description

Factory Reset

Reset the sound bar to the factory default settings. To perform a Factory Reset, Press and Hold the Bluetooth( ) and Volume Down (—) buttons for 5 seconds.

Note: This will erase all settings and preferences that you have set.

VIZIO TV Remote Control

Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume of the sound bar. To enable/disable this function, Press and Hold the Power ( ) and Volume Up ( + ) buttons for 5 seconds.

Energy Star/Ecomode

When the Energy Star setting is enabled, the sound bar will automatically power down after a period of inactivity. When disabled, the sound bar will remain powered on until you turn it off. To enable/disable this function, Press and Hold the Power ( ) and Volume Down (—) buttons for 5 seconds.

Note: Energy Star setting is enabled by default.

Enable VIZIO TV Remote

All 8 LEDs will flash 3 times

Disable VIZIO TV Remote

Buttons are located here.

Enable Energy Star

Disable Energy Star

USING BUTTON COMBINATIONS

English - 23

PROGRAMMING THE SOUND BARYou can program your sound bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.

Function LED Behavior Description

Learn Volume Down Press the Play button to put the sound bar into learning mode. While the sound bar is in learning mode, press the Volume Down button on the TV remote control. All of the LED Indicators on the sound bar will flash two times indicating that it has successfully recognized the TV remote.

Learn Volume Up Press the Play button to put the sound bar into learning mode. While the sound bar is in learning mode, press the Volume Up button on the TV remote control. All of the LED Indi-cators on the sound bar will flash two times indicating that it has successfully recognized the TV remote.

Learn Mute Press the Play button to put the sound bar into learning mode. While the sound bar is in learning mode, press the Mute button on the TV remote control. All of the LED Indicators on the sound bar will flash two times indicating that it has successfully recognized the TV remote.

Learn Vol+

Learn Mute

Learn Vol-(Waiting to learn)Flash from bottom to top and back continuously.

All of the LEDs will blink twice to confirm.

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Turn off your TV speakers when programming your sound bar.

Point both the sound bar and TV remotes towards the front of the sound bar when programming.

Front

Top

Back

Side

Angle

English - 24

To pair the sound bar with a Bluetooth device:

1. Press and hold the Bluetooth button on the sound bar for five (5) seconds or select the BT Pair option from the display remote menu. When the sound bar is in Bluetooth Pairing Mode, the LED Indicators on the Display Panel on the front of the Sound Bar will light sequentially from bottom to top and back again. Once the device is paired, the LED Indicators will stop flashing.

2. You can now search for the sound bar (VIZIO SB3651*) using your Bluetooth device. For more information, refer to the user documentation that came with the device.

3. Play audio from your Bluetooth device. Volume can be controlled on your source device and the sound bar.

BLUETOOTH AUDIO PAIRING

*Sound bar name may be different if the sound bar was previously setup using the SmartCast App.

Bluetooth Device

Top of Sound Bar

Front

Top

Back

Side

Angle

Front

Top

Back

Side

Angle

The Last Yard

English - 25

Your sound bar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the sound bar, as long as you stay within range of the sound bar, your device should remain paired. If the input is changed, the Bluetooth device will disconnect. If the source is changed back to Bluetooth, any paired Bluetooth device will reconnect automatically.

Maximizing Signal

A Bluetooth signal has a range of up to 30 feet. Keep in mind that Bluetooth is a compressed audio format, so streamed music may lose some integrity when compared to a wired connection.

Try the following if your sound quality is less than optimal:• If you hear any break-up or disconnect while streaming music from your device, move the source

device closer to the sound bar. • Be sure that there are no solid obstructions in the line-of-sight between the sound bar and the

source device. • Other wireless devices can affect Bluetooth range, including wireless security cameras, wireless video

baby monitors, cordless phones, and microwave ovens. Turning off or moving these devices may improve Bluetooth range.

Your sound bar is not equipped with a microphone, so it cannot operate as a hands-free device for a smartphone.

Reduce the volume levels on your device and on the sound bar before pressing Play. High volume levels can damage your hearing.

USING BLUETOOTH MODE

English - 26

Back of Sound BarADVANCED SETUP

* Supports .WAV and .MP3 file format playback only.

USB Thumb Drive*

Front

Top

Back

Side

Angle

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Game Console

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Network Media Player

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Tablet/MP3 Player/Laptop

3.5MM TO RCA CABLE

DIGITAL COAXIAL CABLE

DIGITAL OPTICAL CABLE HDMI CABLE

English - 27

Front

Top

Back

Side

Angle

ADVANCED SETUP - HDMI

HDMI CABLE

Connect to HDMI (ARC) port on your TV

HDMI cables transmit both audio and video. To view video from these devices, turn the sound bar on, then set the sound bar input to HDMI In. Set your TV input to the HDMI port to which the sound bar is connected.

Cable/Satellite Box

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

Blu-ray Player

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

English - 28

CONNECTING WITH HDMI ARC

To connect using HDMI*:

1. Connect one end of the HDMI cable to the HDMI 1 (ARC) port on the back of your TV.

2. Connect the other end to the HDMI OUT (ARC) port on your VIZIO Sound Bar.

3. From the AUDIO menu on your TV, change the Digital Audio Setting to Dolby Digital or Bitstream.

4. From the SYSTEM menu, enable CEC and ARC (SAC)† functions.

5. From the CEC menu, select Device Discovery to register the sound bar with the TV.

What is HDMI Audio Return Channel (ARC)?

Using HDMI ARC, your TV can send audio to the sound bar using an HDMI cable.

You will need to connect your sound bar to your TV’s HDMI ARC port using an HDMI cable that is ARC compatible.

If you want to use the volume buttons on the TV remote control to control the sound bar, enable System Audio Control from the CEC menu.

* The following steps are for use with a VIZIO TV, steps may differ by TV manufacturer. See your TV’s user manual for more information.† CEC Function naming may differ by TV manufacturer. See your TV’s user manual for more information.

English - 29

Back of TV*

* HDMI ARC port location may differ by TV manufacturer. See your TV’s user manual for more information.

Front

Top

Back

Side

Angle

Connect to HDMI (ARC) port on your TV

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

HOME THEATER DISPLAY | QUICK START GUIDE

Installation Guide | Models:

CONNECTING WITH HDMI ARC

English - 30

Front

Top

Back

Side

Angle

Front

Top

Back

Side

Angle

The Subwoofer has already been paired with the Sound Bar by VIZIO. However, the Subwoofer may need to be re-linked to the Sound Bar if there is no sound coming from the Subwoofer.

First confirm that the power LED is illuminated. Press and hold the Pairing button on the back of the Subwoofer for 5 seconds. The LED on the back of the Subwoofer will begin to blink.

Press and hold the Power button on the top of the Sound Bar for 5 Seconds. The LED indicators on the front will flash 3 times. The Subwoofer is now linked with the Sound Bar.

What does pairing mean? Pairing means to wirelessly connect.

Buttons are located on top of the Sound Bar

Back of Subwoofer

Power Button

CONNECTING A SUBWOOFER Front

Top

Back

Side

Angle

English - 31

Front

Top

Back

Side

Angle

WALL-MOUNTING THE SOUND BAR

Back of Sound Bar

Insert the two wall-mount screws into the wall-mount screw holes, and then tighten them with a Phillips screwdriver.

Place the included wall mounting template against the wall under your TV. Mark the two bracket holes using a pencil.

Wall-Mount Screw Holes

LEAVE THIS SPACE BETWEEN THE SOUND BAR AND YOUR TV / LAISSEZ CET ESPACE ENTRE LA BARRE DE SON ET VOTRE TÉLÉVISEUR / DEJE ESTE ESPACIO ENTRE LA BARRA DE SONIDO Y EL TELEVISOR

Center Line / Ligne Centrale / Línea Central

27.36"/ 69,50 cm

WALL MOUNTING TEMPLATE / MODÈLE DE SUPPORT MURAL / PLANTILLA PARA MONTAJE EN LA PARED

MARK HEREAPPOSEZ UNE MARQUE ICI

MARQUE AQUÍ

MARK HEREAPPOSEZ UNE MARQUE ICIMARQUE AQUÍ

English - 32

Be sure your screws are attached to wood studs, drywall anchors (for drywall), or concrete anchors (for brick/concrete walls).

Screws for attaching the brackets to the wall are not included. Choose the screw type and length appropriate to your home’s construction. If in doubt, consult a professional installer.

If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.

* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.

Wall Mount ScrewScrew Size: M4 x 10

Included with sound bar

*Bracket ScrewNot Included with sound bar

Front

Top

Back

Side

Angle

English - 33

To wall-mount the satellite speakers:

1. Attach the wall mount screw to the back of the satellite speaker.

2. Secure the wall mount bracket to the wall. Bracket screw is not included.

3. Slide the speaker on to the wall bracket. Ensure the wall mount screw is secured within the bracket grooves.

WALL-MOUNTING THE SATELLITE SPEAKERS

Be sure your screws are attached to wood studs or drywall anchors (for drywall) or concrete anchors (for brick/concrete walls). Wall mounting hardware is not included.

If you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home, consult a professional installer.

Wall Mount Screw

*Bracket ScrewNot Included

* Do not use any of the included screws for the wall mount installation. These are not intended for mounting.

Take a moment to register your product

VIZIO.COM/PRODUCT-REGISTRATIONWhy register?

Customized SupportGet assistance quickly with your information on hand.

News and OffersTake advantage of the latest news and special offers from VIZIO.

Safety and SatisfactionStay up-to-date with important product updates and notifications.

English - 34

Se habla Español • Nous parlons Français

Phone: (877) 698-4946 (toll-free)

You can also contact our popular support team at:

Live chat support available

Find help with:• New product setup• Connecting your devices• Technical problems• Product updates and more

Award-Winning Customer Care At Your Convenience.

NEED HELP?Go to: support.vizio.comVIZIO.COM/PRODUCT-REGISTRATION

English - 35

There is no power.• Press the POWER button on the remote control or on the top of your Sound Bar.

• Ensure the power cord is securely connected.

• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

There is no sound.

• Increase the volume. Press Volume Up on the remote control or on the top of your Sound Bar.

• Press MUTE on the remote to ensure the Sound Bar is not muted.

• Press INPUT on the remote or on the top of your Sound Bar to select a different input source.

• When using either of the Digital Inputs, if there is no audio: (A) Try setting the TV output to PCM or (B) Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.

• On digital inputs, the input LEDs will flash rapidly if an unsupported format is present. Set the source to output PCM.

• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.

• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

I hear buzzing or humming.

• Ensure all cables and wires are securely connected.

• Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device.

• Connect your device to a different input on the Sound Bar.

The remoteisn’t working.

• Replace the remote batteries with new ones.

• Point the remote directly at the center of the Sound Bar when pressing a button.

• If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., Pandora doesn’t support the Back button.)

HELP & TROUBLESHOOTING

English - 36

English - 37

UNITED STATES AND CANADABY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.This warranty contains a binding arbitration agreement and a class action waiver for United States residents. If you live in the United States, the binding arbitration agreement and class action waiver affect your rights under this warranty. Please read the text under the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” carefully.

How Long This Warranty LastsFor non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase.

What This Warranty CoversVIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals.Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty service.

How to Get ServiceBefore obtaining warranty service, you may visit www.vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Technical Support via email at [emailprotected] or via phone at 877 MY VIZIO (877-698-4946). Your Obligations Before ServiceYou must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period.When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center.ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer.

VIZIO’s ResponsibilitiesIf VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer.

Types of ServiceProducts must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer.

What This Warranty Does Not CoverThis warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with

LIMITED WARRANTYHELP & TROUBLESHOOTING

English - 38

unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.

What to Do If You Are Not Satisfied With ServiceIf you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator.

Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting www.adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which the Supplementary Procedures for Consumer-Related Disputes applies, then you are entitled to recover attorneys’ fees as the arbitrator may determine.The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY.NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING.Exceptions to Binding Arbitration Agreement and Class Action WaiverIF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver.In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply.

Exclusions and LimitationsTO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

How the Law Applies

English - 39

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law.

GeneralNo employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the maximum extent not prohibited by law.

Changes to WarrantyThis warranty may change without notice, but any change will not affect your original warranty. Check www.vizio.com for the most current version.

Specifications

Sound Bar: Two 2.8" Full Range Driver for Each Channel (1 for left, 1 for right) One 2.6" Full Range Driver for Center Channel

Satellite Speakers: Two 2.8" Full Range Driver for Each

Subwoofer: One 5.2" Full Range Driver

Connections:

One 3.5mm Stereo Audio One Optical (Toslink) Digital Coaxial One USB (Supports .WAV and .MP3 format only) HDMI In HDMI Out (Arc) Bluetooth 802.11 a/b/g/n/ac (Wireless) Ethernet (RJ45)

Sound Pressure Level (System): 101 dB

Frequency Response (System): 50 Hz - 20 KHz

Voltage: 120 VAC, 60 Hz

Compliances: cTUVus / FCC Class B / ICES-003 /CEC / Energy star

English - 40

FCC Class B Radio Interference StatementNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

(1) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (2) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and(3) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate. (4) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices..”

Notice:1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to

correct such interference.

RF Exposure InformationThis device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for expo-sure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.

IC Statement1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired

operation of the device.2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC Radiation Exposure StatementThis equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with

LEGAL & COMPLIANCE

English - 41

minimum distance 20cm between the radiator & your body.

Battery Disposal and RecyclingYou must dispose of this product properly, according to local laws and regulations. Because this product contains electronic components and/ or a battery, it must be disposed of separately from household waste. Contact local authorities to learn about disposal and recycling options. For more information, visit www.vizio.com/environment.

Software LicensesAll software is provided subject to software license agreements and you agree that you will be bound by such license agreements in addition to other applicable terms of use. By using the VIZIO products, you agree to the VIZIO Terms of Service and Privacy Policy, as well as Google’s Terms of Service and Privacy Policy. The VIZIO Terms of Use and Privacy Policy may be updated from time to time and are available to view at http://www.vizio.com/ terms and http://www.vizio.com/privacy, respectively.

Export RegulationsCustomer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received.

Internet ConnectivityNetwork conditions, environmental and other factors may negatively affect connectivity and the resulting audio quality, if any.

The applications and content of the applications pictured herein or described in accompanying documentation may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIZIO has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions apply. A Google account is required to download applications from the Google Play store. A MyVIZIO account is required to access certain features of the VIZIO SmartCast app. Information in this Quick Start Guide is subject to change without notice. To review the most updated version of this Quick Start Guide and the associated User Manual, go to http://www.vizio.com.

This Quick Start Guide may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors.

VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc.

HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by VIZIO,Inc. is under license. Other trademarks and trade names are those of their respective owners.

Sound pressure level measured using pink noise at 1 meter, c-weighted.

English - 42

This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating.We want to help you save energy.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are registered trademarks of Dolby Laboratories.

The Bluetooth® word mark and Logos are registered trademark owned by Bluetooth SIG,Inc. and any use of such marks by VIZIO, Inc. is under license. Other trademarks and trade names are those of their respective owners.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, Virtual:X, and the DTS Virtual:X logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital TruVolume is a trademark of DTS, Inc. © DTS, Inc. All rights reserved.

QUICK START GUIDE · 2019-01-23 · ac Side Angle Standard Optical RCA RCA To 3 5mm Satellite HDMI Cable Standard Optical RCA RCA To 3 5mm Satellite HDMI Cable Installation uide odels - [PDF Document] (2024)

References